GENERAL DESCRIPTION
The AD9233 is a monolithic, single 1.8 V supply, 12-bit, 80 MSPS/105 MSPS/125 MSPS analog-to-digital converter (ADC), featuring a high performance sample-and-hold amplifier (SHA) and on-chip voltage reference. The product uses a multistage differential pipeline architecture with output error correction logic to provide 12-bit accuracy at 125 MSPS data rates and guarantees no missing codes over the full operating temperature range.

FEATURES
   1.8 V analog supply operation
   1.8 V to 3.3 V output supply
   SNR = 69.5 dBc (70.5 dBFS) to 70 MHz input
   SFDR = 85 dBc to 70 MHz input
   Low power: 395 mW @ 125 MSPS
   Differential input with 650 MHz bandwidth
   On-chip voltage reference and sample-and-hold amplifier
   DNL = ±0.15 LSB
   Flexible analog input: 1 V p-p to 2 V p-p range
   Offset binary, Gray code, or twos complement data format
   Clock duty cycle stabilizer
   Data output clock
   Serial port control
      Built-in selectable digital test pattern generation
      Programmable clock and data alignment
  
APPLICATIONS
   Ultrasound equipment
   IF sampling in communications receivers
      IS-95, CDMA-One, IMT-2000
   Battery-powered instruments
   Hand-held scopemeters
   Low cost digital oscilloscopes