PRODUCT DESCRIPTION
The dual channel spot water detector is used to
detect the presence of water or conductive liquids.
It features two detection points each with an
independent relay output and is designed to signal
alarms if one or more of three conditions are met:
water is detected, power is lost to the unit, or if
there is an internal failure.
The dual channel spot water detector features
spot detection on channel 1, with sensing probes
protruding from the bottom of the enclosure and
on channel 2, the selection of either remote spot
or conductivity cable which are available in several
lengths.
It is housed in an IP65 rated enclosure with height
adjustable mounting legs. An LED provides visual
status indication.