The NIS/NIV3071 is a 4−channel, 60 V, 2.5 A per channel eFuse
which protects downstream loads from output shorts, overloads and
overcurrent events. Each channel is in a high−side configuration, and
is independently controlled by its corresponding enable pins. The
NIS/NIV3071 communicates status via a common active−low fault
pin. This eFuse features an internal soft start delay, trip time control,
and an adjustable current limit setting common to all channels. The
NIS3071 is well suited for industrial and telecom applications while
the NIV3071 is for automotive applications.

Features
• 4 Independent Channels with 2.5 A Current Capability Each
• Power Device Thermally Protected for Each Channel
• No External Current Shunt Required
• Active−High Digital Enable Pin
• Open−Drain Common Fault Pin
• Adjustable Overcurrent Limit for All Channels
• Adjustable Turn−on Time Control
• NIV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant

Typical Applications
• Automotive Body Control Modules
• Power Distribution Box
• Automotive Zonal Controllers
• Load/Harness Protection
• Automotive Low−Medium Power Loads
• General Purpose High−Side Load Switch
• Power Amplifier Protection
• Motor Drive Protection
• Telecomm Equipment
• 8 V to 60 V Industrial