1 Features
• AEC-Q100 Qualified with the following results for
automotive applications:
– Device temperature grade 2: –40°C to 105°C
ambient operating temperature range
– Device HBM ESD classification level H2
– Device CDM ESD classification level C4B
• Mono class-D BTL speaker amplifier
– 2.6 W at 10% THD_N (4 Ω, 5.5 V)
– 1.7 W at 10% THD+N (8 Ω, 5.5 V)
• Supports both digital and analog input
• Single supply 2.7 V to 5.5 V
• Load diagnostic functions:
– Output-to-GND Short
– Terminal-to-terminal short
– Output-to-power short
– Over temperature
• Supports 9-kHz to 96-kHz sample rates
• Two single-ended inputs with output mixing and
level control
• Embedded power-on-reset
• Programmable digital audio processing:
– Bass boost
– Treble
– EQ (up to 6 biquads)
• I2S, Left-justified, right-justified, DSP, and TDM
audio interfaces
• I2C and SPI Control With Auto-Increment
• 24-Pin, VQFN wettable flank (automotive grade)
package

2 Applications
• Instrument Cluster
• Automotive Emergency Call (eCall)
• Telematics

3 Description
The TAS2505-Q1 is a mono Class-D speaker amp
that supports both Digital and Analog inputs. The
device is designed for automotive instrument cluster,
emergency call (eCall), and telematics applications.
Direct I2S input removes the need for an external
DAC in the audio signal path, and the integrated
LDO enables single supply operation. In addition to
integration, the device features programmable audio
processing. The onboard DSP supports bass boost,
treble, and EQ (up to 6 biquads). An on-chip PLL
provides the high-speed clock needed by the DSP.
The volume level is register controlled.