8-Pin Version of NE592 . . . Saves Printed
Circuit Board Space
Adjustable Gain to Typically 400 V/V
No Frequency Compensation Required
Adjustable Pass Band
AVD Range . . . 250–600 V/V

description
This device is a monolithic two-stage video
amplifier with differential inputs and differential
outputs.
Internal series-shunt feedback provides wide
bandwidth, low phase distortion, and excellent
gain stability. Emitter-follower outputs enable the
device to drive capacitive loads. All stages are
current-source biased to obtain high commonmode
and supply-voltage rejection ratios.
Fixed differential amplification of nominally 400 V/V can be selected without external components, or
amplification may be adjusted from 0 to approximately 400 V/V by the use of a single external resistor
connected between the gain adjustment pins A and B. No external frequency-compensating components are
required for any gain option.
The device is particularly useful in magnetic-tape or disk-file systems using phase or NRZ encoding and in
high-speed thin-film or plated-wire memories. Other applications include general-purpose video and pulse
amplifiers where wide bandwidth, low phase shift, and excellent gain stability are required.
The TL592 is characterized for operation from 0°C to 70°C.