Features
 Compliant with Universal Serial Bus 3.0 Specification Revision 1.0, which is released by USB
Implementers Forum, Inc
- Supports the following speed data rates as follows: Low-speed (1.5 Mbps) / Full-speed (12
Mbps) / High-speed (480 Mbps) / Superspeed (5 Gbps)
- Supports USB 3.0 link power management (U0/U1/U2/U3)
- Supports USB 2.0 link power management (LPM: L0/L1/L2/L3)
 Configurable downstream port counts of 2, 3, or 4 ports
 Supports all VBUS control options
- Individual or global over-current detection
- Individual or ganged power control
 Supports USB 3.0/2.0 Compound (non-removable) devices by I/O pin configuration
 Supports clock output (24/12 MHz) for Compound (non-removal) device on downstream ports
 Supports Energy Star and EuP specifications for low-power PC peripheral system
 Single 5 V Power Supply
- On chip LDO for 3.3 V from 5 V input and Switching Regulator for 1.05 V from 5 V input
 System clock: 24 MHz Crystal or Oscillator
 Supports USB Battery Charging Specification Revision 1.2 and other portable devices
- DCP mode of BC 1.2
- CDP mode of BC 1.2
- China Mobile Phone Chargers
- EU Mobile Phone Chargers
- Apple iOS products
- Other major portable devices
 Supports SPI ROM for optional firmware and parameter data
 Small Footprint
- Small and low pin count package with simple pin assignment for PCB layout
- Integration of many peripheral components
- Direct routing of all USB signal traces to connector pins using one layer of the PCB
 Self/Bus-Powered modes can be set by pin strapping
 Integrated termination resistors for USB
 Provides SUSPEND status output
 Supports Port Indicator control (only Green color)