1 Features
• AEC-Q100 qualified with the following results:
– Device temperature grade 1: –40°C to +125°C
ambient operating temperature range
– Device HBM ESD classification level 2
– Device CDM ESD classification level C2b
– Enhanced connector pin ESD protection
• USB Power Delivery (PD) controller with
Programmable Power Supply (PPS) support
– Wide VIN: 5.5 V to 18 V (40-V maximum)
– Integrated buck-boost 4 power switches
supporting up to 65-W USB PD output power
– VBUS output: 3–21 V with ±20-mV step size
– IBUS output: 0–3 A with ±50-mA current limit
step size
– VBUS short circuit to VBAT and GND protection
– VBUS cable droop compensation
– MFi overcurrent protection
– Switching frequency: 300, 400, 450 kHz
– DC/DC sync in/out with dithering
• USB port configurations options
– 1 USB-PD Port (TPS25762-Q1)
– 2 USB-PD Ports (TPS25772-Q1)
• Compliant to USB
– USB Type-C® Power Delivery Rev 3.1
• TPS25762-Q1: USB–IF certification with
PPS, TID: 9509
• TPS25772-Q1: USB–IF certification with
PPS, TID: 9161
• CC logic, VCONN source and discharge
• USB cable polarity detection
– Battery charging specification rev 1.2
• DCP: Dedicated Charging Port
• Legacy Fast Charging
– 2.7-V divider-3 mode
– 1.2-V divider mode
– High Voltage DCP Protocol
• Microcontroller core allows
– Firmware updates
– Supply voltage and temperature-dependent
power management
• Short to VBUS and VBAT protection
– VBUS
– Px_ DP and Px_DM
– Px_CC1 and Px_CC2
• HotRod™ QFN package with wettable flank

2 Applications
• Automotive USB Charge
• Automotive Media Hub
• Automotive Head Unit
• Automotive Rear Seat Entertainment

3 Description
The TPS25762-Q1 is a fully integrated USB Type-
C® Power Delivery (PD) solution with integrated
Buck-Boost converter for automotive single USB
port applications. Functionality includes: integrated
Buck-Boost converter with 4 power switches; an
ARM® Cortex®-M0; USB port controller with Type-C
cable plug and orientation detection; USB Battery
Charging Specification Version 1.2 (BC1.2) detection;
USB Endpoint PHY; device power management and
supervisory circuitry; and connector pin protection
over-voltage and short-circuit protection.
An intelligent System Policy Manager maximizes
delivered USB power while protecting the system from
automotive battery transient and over-temperature
conditions.
Device configuration settings are selected through an
intuitive graphical user interface (GUI).