1 Features
• Gain bandwidth: 50 MHz
• Zerø-crossover distortion topology:
– CMRR: 115 dB (typical)
– Rail-to-rail input and output
• Input 100 mV beyond supply rail
• Noise: 4.5 nV/√Hz
• Slew rate: 27 V/μs
• Fast settling: 0.2 μs to 0.01%
• Precision:
– Offset drift: 2 μV/°C (maximum)
– Input bias current: 20 pA (maximum)
• Operating voltage: 2.2-V to 5.5-V

2 Applications
• Signal conditioning
• Data acquisition
• Active filters
• Test equipment
• Audio
• Wideband amplifiers
• Rack server

3 Description
The TLV365 and TLV2365 devices (TLVx365) are
a family of zerø-crossover, rail-to-rail input and
output, CMOS operational amplifiers, optimized for
low voltage and cost-sensitive applications. Low-noise
(4.5 nV/√Hz) and high-speed operation (50-MHz gain
bandwidth) make these devices an excellent choice
for driving sampling analog-to-digital converters
(ADCs) in applications such as low-side current
sensing, audio, signal conditioning, and sensor
amplification.
Special features include an excellent common-mode
rejection ratio (CMRR), no input stage crossover
distortion, high input impedance, and rail-to-rail input
and output swing. The input common-mode range
includes both the negative and positive supplies. The
output voltage swings to within 10 mV of the rails.
The TLVx365 are specified for operation from −40°C
to +125°C.