[DNH]

Installation, Operation and Maintenance Procedures

When mounting the loudspeaker please ensure that it is re-assembled in the same manner in which it was

received.

Install outer ring into the hole by bending down 4 metal strips. Use nail / screw to prevent the ring from

turning. Connect cable to terminal. Screw the loudspeaker grill clockwise into fixed position.

For optimum performance, always use the correct voltage / power and operate within the frequency limits as

stated.

Take care when loudspeaker is energized (100 V).

This loudspeaker is supplied with a 2 year warranty against defective workmanship.