FEATURES
Single Chip TFT-LCD Controller/Driver with RAM
On-chip Display Data RAM (i.e. Frame Memory)
132 (H) x RGB x 162 (V) Bits
LCD Driver Output Circuits:
Source Outputs: 132 RGB Channels
Gate Outputs: 162 Channels
Common Electrode Output
Display Colors (Color Mode)
Full Color: 262K, RGB=(666) Max., Idle Mode OFF
Color Reduce: 8-color, RGB=(111), Idle Mode ON
Programmable Pixel Color Format (Color Depth) for Various Display Data input Format
12-bit/pixel: RGB=(444) Using the 384k-bit Frame Memory and LUT
16-bit/pixel: RGB=(565) Using the 384k-bit Frame Memory and LUT
18-bit/pixel: RGB=(666) Using the 384k-bit Frame Memory and LUT
Various Interfaces
Parallel 8080-series MCU Interface
(8-bit, 9-bit, 16-bit & 18-bit)
Parallel 6800-series MCU Interface
(8-bit, 9-bit, 16-bit & 18-bit)
3-line Serial Interface
4-line Serial Interface
Display Features
Support Both Normal-black & Normal-white LC
Software Programmable Color Depth Mode
Partial Window Moving & Data Scrolling
Built-in Circuits
DC/DC Converter
Adjustable VCOM Generation
Non-volatile (NV) Memory to Store Initial Register Setting
Oscillator for Display Clock Generation
Factory default value (module ID, module version, etc) are stored in NV memory.
Timing Controller
Built-in NV Memory for LCD Initial Register Setting
7-bits for ID2
8-bits for ID3
7-bits for VCOM Offset Adjustment
Wide Supply Voltage Range
I/O Voltage (VDDI to DGND): 1.65V~3.7V (VDDI ≤ VDD)
Analog Voltage (VDD to AGND): 2.5V~4.8V
On-Chip Power System
Source Voltage (GVDD to AGND): 3.15V to 5V
VCOM level (VCOM to AGND): -0.425V to -2.0V
Gate Driver HIGH Level (VGH to AGND): +10.0V to +15V
Gate Driver LOW Level (VGL to AGND): -13V to -7.5V
Operating Temperature: -30°C to +85°C