The 0131 valve is a direct-acting toggle valve. A variety of seal material
combinations are available depending on the application. Thanks to the
diaphragm separation between actuator and fluid housing, aggressive media
such as acids and alkaline solutions can also be safely controlled. The assortment
is rounded out with plastic housings made of PVC. The solenoids are
moulded with a highly resistant chemical epoxy. “Kick and drop” electronics
are moulded into all DC solenoid variants for reduced electrical power consumption.
An optional electrical position feedback sensor reliably detects the
switching position. Conformity with KTW and W270 are available for drinking
water applications. Furthermore, versions of type 0131 are available that
conform with DIN EN 45545:2016 (standard parts 2 and 5) – fire protection in
railway vehicles.
Type description