The electromagnetic flowmeter Type 8045 is made up of an electronic module
including a backlit display, operating keys and a sensor consisting of PVDF or
stainless steel material. It has been designed to measure a flow rate of neutral and
slightly aggressive fluids with a conductivity of more than 20 μS/cm in DN 06…
DN 400 pipes.
The Type 8045 is equipped with a 4…20 mA output, a digital output (pulse output
by default). Some versions are equipped with two relay outputs and one digital
input. Two independent totalizers allow counting the flow rate.
This flowmeter is available either with a G 2" connection with a PVDF sensor or, a
G 2" or clamp connection with a stainless steel sensor which are designed for use
with an Insertion fitting Type S020.
The version with a stainless steel sensor can be used in applications with higher
pressures (PN 16) and higher temperatures (110 °C). The version with Alloy C22
electrodes has been designed for applications with aggressive fluids (chemicals)
and especially sea water applications.
Type description