The temperature sensor is used for measuring and monitoring the temperature.
The impact of the temperature on a resistance thermometer generates a
signal which is amplified, digitised and processed.
Instead of an analogue output, this device offers a digital interface IO-Link.
This allows bidirectional data transfer with any IO-Link master. Data access
occurs via the available standardised IODD.
The IO-Link corresponds to the specification version 1.1. The bidirectional
communication is used to read process data, parameters, diagnostic information
and status messages as well as to set parameters. The two green
LEDs are permanently lit as soon as power is supplied to the device. Once an
IO-Link connection has been established, the LEDs flash.
The switching behaviour and the switching thresholds of the digital outputs
(max. 2; “PNP” or “NPN”) can - like many other parameters - be individually
configured.
Type description