1 Features
• PD Controller is certified by the USB-IF for PD3.1
– PD3.1 silicon is required for certification of new
USB PD designs
– TPS25751 TID#: 10306
– Article on PD2.0 vs. PD3.0
• Optimized for USB Type-C PD power applications
– Integrated I2C control for TI battery chargers
• BQ25756, BQ25756E, BQ25790, BQ25792
• BQ25798, BQ25713, BQ25731
– Web-based GUI and pre-configured firmware
– Optimized for power consumer only (sink)
(UFP) applications
– Optimized for power provider/power consumer
(DRP) applications
– For a more extensive selection guide and
getting started information, please refer to
www.ti.com/usb-c and E2E guide
• Programmable Power Supply (PPS)
– Supports PPS source & sink
– Standalone PPS source control TI battery
chargers
– Programmable interface for PPS sink
• Liquid Detection
– Measures directly at the Type-C connector
– Integrated error handling and protection
• Integrated fully managed power paths
– Integrated 5V, 3A, 36mΩ sourcing switch
(TPS25751S and TPS25751D)
– Integrated 20V, 5A, 16mΩ bi-directional load
switch (TPS25751D only)
• Integrated robust power path protection
– Integrated reverse current protection,
undervoltage protection, overvoltage protection,
and slew rate control the high-voltage bidirectional
power path
– Integrated undervoltage and overvoltage
protection and current limiting for inrush current
protection for the 5V/3A source power path
– 26V tolerant CC pins for robust protection when
connected to non-compliant devices
• USB Type-C® Power Delivery (PD) controller
– 10 configurable GPIOs
– BC1.2 advertisement/detection support
– 3.3V LDO output for dead battery support
– Power supply from 3.3V or VBUS source
– 1 I2C controller port
– 1 I2C target port

2 Applications
• Power tools, power banks, retail and payment
• Wireless speakers, Cordless vacuum cleaner
• personal electronics and industrial applications
• Home health care and Personal care and fitness

3 Description
The TPS25751 is a highly integrated stand-alone USB
Type-C and Power Delivery (PD) controller optimized
for applications supporting USB-C PD Power. The
TPS25751 integrates fully managed power paths
with robust protection for a complete USB-C PD
solution. The TPS25751 also integrates control for
external battery charger ICs for added ease of
use and reduced time to market. The intuitive web
based GUI asks the user a few simple questions on
the applications needs using clear block diagrams
and simple multiple-choice questions. As a result,
the GUI creates the configuration image for the
user’s application, reducing much of the complexity
associated with competitive USB PD solutions.