•Four protected 10 mOhm and 35 mOhm high side switches (at 25 °C)
•Operating voltage range of 6.0 to 20 V with sleep current < 5.0 μA, extended mode from 4.0 to 28 V
•8.0 MHz 16-bit 3.3 V and 5.0 V SPI control and status reporting with daisy chain capability
•PWM module using external clock or calibratable internal oscillator with programmable outputs delay management
•Smart overcurrent shutdown, severe short-circuit, overtemperature protections with time limited autoretry, and Fail-safe mode in case of MCU damage
•Output OFF or ON open-load detection compliant to bulbs or LEDs and short to battery detection
•Analog current feedback with selectable ratio and board temperature feedback

Applications
•Low-voltage automotive lighting•Xenon bulbs•Halogen bulbs•Light-emitting diodes (LEDs)•High beam•Low beam•Flashers•Low-voltage industrial lighting