GENERAL DESCRIPTION
The SAA7182; SAA7183 encodes digital YUV video data to an NTSC, PAL, SECAM CVBS or S-Video signal and also RGB.
The circuit accepts CCIR compatible YUV data with 720 active pixels per line in 4 : 2 : 2 multiplexed formats, for example MPEG decoded data. It includes a sync/clock generator and on-chip Digital-to-Analog Converters (DACs).
The circuit is compatible to the DIG-TV2 chip family.

FEATURES
• CMOS 5 V device
• Digital PAL/NTSC/SECAM encoder
• System pixel frequency 13.5 MHz
• Accepts MPEG decoded data on 8-bit wide input port. Input data format Cb, Y, Cr etc. or Y and Cb, Cr on 16 lines (“CCIR 656”)
• Three DACs for CVBS, Y and C operating at 27 MHz with 10-bit resolution
• Three DACs for RGB operating at 27 MHz with 9-bit resolution, RGB sync on CVBS and Y
• CVBS, Y, C and RGB output simultaneously
• Closed captioning and teletext encoding including sequencer and filter
• On-chip YUV to RGB matrix
• Fast I2C-bus control port (400 kHz)
• Encoder can be master or slave
• Programmable horizontal and vertical input synchronization phase
• Programmable horizontal sync output phase
• Internal Colour Bar Generator (CBG)
• Overlay with Look-Up Tables (LUTs) 8 × 3 bytes
• Macrovision Pay-per-View protection system as option, also used for RGB output