Benefits and Features
● HDMI v1.4b/v2.0a Input Interface
● 3Gbps or 6Gbps Forward-Link Rates
● 187.5Mbps Reverse-Link Rate
● Full-Duplex Capability Over a Single Wire
● Ideal for High-Definition Video Applications
• Up to 215MHz PCLK per Link
• Up to 430MHz PCLK in Dual-Link Mode
● Uses Low-Cost 50Ω Coax or 100Ω STP Cables
● Forward and Reverse I2S or 7.1 TDM Audio
● Video Pattern Generator Provides Fast Link Validation
● Line-Fault Monitor Detects Serial I/O Shorted
Together, to Ground, to Battery or Open
● ASIL-Relevant Functional Safety Features
• ASIL B Compliant
• 16-Bit CRC Protection of Control-Channel Data
(I2C, UART, SPI, GPIO, Audio)
• Retransmission on Error of all Control-Channel
Data and Audio Data Upon Error Detection
• Optional 32-Bit Video-Line CRC
• Selectable Interrupts for Fault Detection
• Video Watermark Generation
● Performance Tools Ensure High Link Margin
• Continuous Adaptive Equalization on GMSL Links
• Built-In Forward- and Reverse-Channel PRBS
Generator for BER Testing of Serial I/O Links
• Eye-Opening Monitor for Link Diagnosis
● Concurrent Control Channel for Device Configuration
and Communication with Remote Peripherals
• Primary and Pass-Through I2C/UART, SPI, and
Tunneled or Register-Programmable GPIO
• Settable Priority Levels
• Eight Hardware Programmable Device Addresses
• Up to 20 Programmable GPIO
• Sleep Mode with Register State Retention
● Operation Specified Over the -40°C to +105°C
Automotive Temperature Range
● AEC-Q100 Qualified
● Compact 8mm x 8mm TQFN with an Exposed Pad

Applications
● Navigation and Touch-Panel Displays
● Digital Instrument Clusters and Heads-Up Displays
● Rear-Seat and Passenger Infotainment Displays
● Consumer HDMI Port Applications