GENERAL DESCRIPTION

The TDA1510AQ is a class-B integrated output amplifier encapsulated in a 13-lead single in-line (SlL) plastic power package. Developed primarily for car radio application, the device can also be used to drive low impedance loads (down to 1,6Ω). With a supply voltage (VP) of 14,4 V, an output power of 24 W can be delivered into a 4ΩBridge Tied Load (BTL), or when used as a stereo amplifier, 2×12 W into 2Ωor 2×7 W into 4Ω.

Features

• Flexibility−stereo as well as mono BTL

• Low offset voltage at the output (important for BTL)

• Load dump protection

• A.C. short-circuit-safe to ground

• Low number, small sized external components

• Internal limiting of bandwidth for high frequencies

• High output power

• Large useable gain variation

• Good ripple rejection

• Thermal protection

• Low stand-by current possibility

• High reliability.