In-Circuit Debugging and In-Circuit Programming Tool for ST7

The inDart-ST7 is a powerful, low-cost In-Circuit Debugging (ICD) and In-Circuit Programming (ICP) tool, developed for ST7 in partnership with Softec Microsystems (www.softecmicro.com).
The inDART-ST7 takes advantage of the ST7 Visual Develop (STVD7) Integrated Development Environment and ST7 In-Circuit Communication (ICC) capability to deliver ICD and ICP for a wide range of ST7 Flash microcontrollers. Hardware and software debugging features include real-time code execution, stepping and breakpoints.
InDart-ST7 offers parallel or USB connection to the host PC, depending on the model, and 10-pin ICC connection for connecting to evaluation or application board

In-circuit debugging features:
● Source level and symbolic debugging
● Unlimited instruction breakpoints
● Execution control including instruction stepping
● Advanced breakpoints on data, access type, access range, stack...(depending on model)
● Watch variables, registers and peripherals

In-circuit programming features:
● Blank Check/Erase/Read/Verify for Flash, EEPROM memory and option bytes

inDART Kit Contents
● inDART ICC interface board to connect the host PC to an evaluation or application board
● Evaluation board that includes an ST7 (except for the STXF-InDART)
● inDART edition of the STVD7 integrated development environment