Product Description
LNO 10000 B3 is a low noise oscillator generating an output signal at 10 GHz, phase-lockable on an external 10 MHz reference.
It is composed by an OCSO (Oven Controlled SAW Oscillator) at 500 MHz fundamental frequency, followed by a frequency multiplier x20. Three operating modes are available, through Control Input signal:
 Free running Control Input = Not connected
 Voltage controlled Control Input = DC Voltage
 Phase Lock Loop Control Input = 10 MHz Ref
LNO 10000 B3 is designed for routine environment (test equipment, shelter, ground based military equipment ...). It is available in a 120.7mm x 76.2mm x 23.3mm package.

Features
Excellent phase noise performance (typical values) :
 -115 dBc/Hz @ 1 kHz offset
 -140 dBc/Hz @ 10 kHz offset
 -151 dBc/Hz noise floor

Applications
 Instrumentation (test equipment, simulator)
 Ground based military equipment as per MIL-PRF-28800F, Class 3
 Clock for high speed ADC