Features:
One standard “8” output will drive eight terminator circuits.
Will terminate a CMOS data bus with up to 40 B~series inputs inputs or 3-stats
outputs connected at Vop of 5 V.
Input terminals protected by standard “B" series ESD protection network.
Preserves final logic state.
Output after switching is closer to VoD or VSs rail than with a resistor.
Requires only one solder connection.
Open circuited terminator not used will not affect performance.
Can be connected to any CMOS 1/0 fins.
Draws current only when logic state is changing.
Can be preset.