1FEATURES
2• DC - 1.5 Gbps Low Jitter, Low Skew, Low
Power Operation
• Pin Configurable, Fully Differential, Non-
Blocking Architecture
• Wide Input Common Mode Voltage Range
Allows DC-Coupled Interface to LVDS, CML
and LVPECL Drivers
• On-chip 100Ω Input and Output Termination
Minimizes Insertion and Return Losses,
Reduces Component Count and Minimizes
Board Space
• 7 kV ESD on LVDS I/O Pins Protects Adjoining
Components
• Small SOIC-16 Space Saving Package

APPLICATIONS
• High-Speed Channel Select Applications
• Clock and Data Buffering and Muxing
• SD/HD SDI Routers

DESCRIPTION
The DS10CP152 is a 1.5 Gbps 2x2 LVDS crosspoint
switch optimized for high-speed signal routing and
switching over lossy FR-4 printed circuit board
backplanes and balanced cables. Fully differential
signal paths ensure exceptional signal integrity and
noise immunity. The non-blocking architecture allows
connections of any input to any output or outputs.
Wide input common mode range allows the switch to
accept signals with LVDS, CML and LVPECL levels;
the output levels are LVDS. A very small package
footprint requires a minimal space on the board while
the flow-through pinout allows easy board layout.
Each differential input and output is internally
terminated with a 100Ω resistor to lower device return
losses, reduce component count and further minimize
board space.