Features
 One differential full-bridge sensor element measurement
 One internal chip temperature measurement
 One external diode temperature measurement
 One external RTD temperature measurement
 Digital compensation for offset, gain, and higher order
nonlinearity as well as temperature coefficients of the
differential sensor element input signal
 Operating temperature range: -40°C to +150°C
 Accuracy as high as ±0.50% full scale at -40°C to
+150°C
 Outstanding accuracy for NTC: within ±1°C
 NVM memory for configuration, calibration data, and
configurable measurement and conditioning functionality
 SENT output compliant to SAE J2716 JAN2010
(SENT Rev. 3) and APR2016 (SENT Rev. 4) standard
 Supports output of one or more sensor signals and
product identification via a single SENT interface connection
 Configurable for nearly all resistive bridge sensors
 One-pass, end-of-line calibration algorithm minimizes production costs
 No external trimming or components required
 Qualified according to AEC-Q100 Grade 0 standard
 Supply voltage: 4.75V to 5.25V
 Over-voltage and reverse-polarity protection up to ±18V
 Bridge sensor input span: 1mV/V to 800mV/V
 Bridge sensor signal ADC resolution: 14-bit
 Output resolution: 12-bit via SENT interface
 Package: 24-QFN (4 × 4 mm; wettable flanks)