1 Features
1• Meets the Requirements of ISO11898-2
• Turbo CAN:
– Specified for 2-Mbps CAN FD (CAN with
Flexible Data Rate)
– Short and Symmetrical Propagation Delay
Times and Fast Loop Times for Enhanced
Timing Margin
– Higher Data Rates in CAN Networks
• I/O Voltage Range Supports 3.3-V and 5-V MCUs
• Ideal Passive Behavior When Unpowered
– Bus and Logic Terminals are High Impedance
(no load)
– Power-Up/Down With Glitch Free Operation
On Bus
• Protection Features
– HBM ESD Protection Exceeds ±12 kV
– Bus Fault Protection –27 V to 40 V
– Undervoltage Protection on Supply Terminals
– Driver Dominant Time Out (TXD DTO)
– SN65HVD267: Receiver Dominant Time Out
(RXD DTO)
– SN65HVD267: FAULT Output Terminal
– Thermal Shutdown Protection
• Characterized for –40°C to 125°C Operation

2 Applications
• 2-Mbps Operation in CAN with Flexible Data Rate
Networks
• 1-Mbps Operation in Highly Loaded CAN
Networks Down to 10-kbps Networks Using TXD
DTO
• Industrial Automation, Control, Sensors and Drive
Systems
• Building, Security and Climate Control Automation
• Telecom Base Station Status and Control
• SN65HVD267: Functional Safety With Redundant
and Multi-topology CAN networks
• CAN Bus Standards Such as CANopen,
DeviceNet, NMEA2000, ARNIC825, ISO11783,
CANaerospace

3 Description
This CAN transceiver meets the ISO1189-2 High
Speed CAN (Controller Area Network) physical layer standard. It is designed for data rates in excess of 2
Mpbs (megabits per second) for CAN FD (CAN with
flexible data rate), greater than 1 Mbps for CAN in
short networks, and enhanced timing margin and
higher data rates in long and highly-loaded networks.
The device provides many protection features to enhance device and CAN-network robustness. The
SN65HVD267 adds additional features, allowing easy
design of redundant and multi-topology networks with
fault indication for higher levels of safety in the CAN
system.