Features
• Automotive AEC-Q100 Qualified
• 1:6 LVCMOS Output Fanout Buffer from DC to
160 MHz
• Low Additive Phase Jitter of 60 fs RMS
• 8 mA Output Drive Strength
• Low Power Consumption for Portable
Applications
• Automotive Applications Grade 1 Compliant
• Low Input-Output Delay
• Output-Output Skew <250 ps
• 2.5V to 3.3V, +10% Operation
• 1.8V +10%/–5% Operation up to 67 MHz
• Wide Temperature Range: –40°C to +125°C
• Available in 16-Pin TSSOP Package
Applications
• Automotive Applications:
- ADAS Vision System
- Infotainment and DGeneral Description
The PLA133-67 is an advanced fanout buffer designed
for automotive applications and other high
performance, low-power, small form factor
applications. The PLA133-67 accepts a reference clock
input from DC to 160 MHz and provides six outputs of
the same frequency with ultra-low additive jitter. The
device is AEC-Q100 qualified.
The PLA133-67 is available in a TSSOP-16L package.
The PLA133-67 outputs can be disabled to a high
impedance (tri-state) by pulling low the OE pin. When
the OE pin is high, the outputs are enabled and follow
the REF input signal. When the OE pin is left open, a
pull-up resistor on the chip will default the OE pin to
logic 1 so the outputs are enabled.ashboard