 Main features
The R53SM e R53ST modules with quick connection are made via the hot moulding method that produces smaller dimensions
and thicknesses with notable transit sections for the fluids and hence limited pressure loss and flow noise.
The flow rate is regulated by means of a micrometric lockshield with mechanical memory, that can intercept the flow for
maintenance purposes and then easily restore the initial operating conditions.
The modules are manually assembled and the hydraulic seal is guaranteed by the pre-assembled O-Rings.
The R53SM modules are connected to the other components (valves, cocks, pipes, etc.) by interposing the two R53ST end
modules with female thread.