1 Features
1• Compliant to USB Type-C Specification 1.1
• Mode Configuration
– Host Only – DFP
• Channel Configuration (CC)
– Attach of USB Port Detection
– Cable Orientation Detection
– Type-C Current Mode (Default, Mid, High)
• Supply Voltage 3.3 V ± 10%
• 2:1 Mux Solution for USB 3.1 Signaling
• Operates up to 10 Gbps with Wide -3 dB BW of 8
GHz
• Excellent Dynamic Characteristics at 2.5 GHz
– Crosstalk = –39 dB
– Off Isolation = –22 dB
– Insertion Loss = –1.2 dB
– Input Return Loss = –12 dB
• Low Active (2 mW) and Standby Power (50 μW)
Consumption

2 Applications
• Desktop and Notebook PCs
• USB Type-C DFP Applications
• Motherboards

3 Description
HD3SS2522 is a 2:1 USB mux with Configuration
Channel (CC) logic with Downstream Facing Port (DFP) support. The HD3SS2522 presents itself as a
DFP according to the USB Type-C Spec. The CC
logic block monitors the CC1 and CC2 pins voltages
to determine when a USB port has been attached. Once a USB port has been attached, the CC logic
also determines the orientation of the cable and
configures the USB SS mux accordingly.
The HD3SS2522 provides an VBUS_EN signal to
control legacy power switch to provide 5 V to VBUS.
The device also provides control signals needed to
support 5 V VCONN sourcing for ecosystems implementing USB Type-C.
Excellent dynamic characteristics of the device allow high speed switching with minimum attenuation to the
signal eye diagram and little added jitter. The device
also has low current consumption in Standby mode.