1FEATURES
2• Available with 5.0V or 3.3V Output Voltage
• Ultra Low Ground Pin Current, 25 μA Typical
for 100 μA Load
• VOUT Initial Accuracy of ±1.5%
• V OUT Accurate to ±3% Over Load and
Temperature Conditions
• Low Dropout Voltage, 200 mV Typical with 150
mA Load
• Low Off State Ground Pin current for
LM9076BMA
• Delayed RESET Output Pin for Low VOUT
Detection
• +70V/-50V Voltage Transients
• Operational VIN up to +40V

DESCRIPTION
The LM9076 is a ±3%, 150 mA logic controlled
voltage regulator. The regulator features an active
low delayed reset output flag which can be used to
reset a microprocessor system at turn-ON and in the
event that the regulator output voltage falls below a
minimum value. An external capacitor programs a
delay time interval before the reset output pin can
return high.
Designed for automotive and industrial applications,
the LM9076 contains a variety of protection features such as thermal shutdown, input transient protection
and a wide operating temperature range. The
LM9076 uses an PNP pass transistor which allows
low drop-out voltage operation.