FEATURES
 Applicator designed to industry-standard mounting and 135.80mm (5.346”) shut height
 Quick setup time; plus, the crimp height, track and feed adjustments can be set without removing the applicator from the press
 Fine adjustment allows users to achieve target with little effort by adjusting in increments of 0.015mm (.0006”) for conductor crimp height and 0.025mm (.001”) for insulation height
 Independent adjustment rings allow users to quickly adjust the conductor or insulation crimp height without affecting each other
 Directly adapts to most automatic wire processing machines
 This applicator was designed for use in a wire processor only
 Fine adjustment of the bend is achieved using the bend adjust dial