Features
• STM32L496AGI6 microcontroller featuring
1 Mbyte of Flash memory and 320 Kbytes of
RAM in a UFBGA169 package
• USB OTG HS
• On-board current measurement
• SAI Audio CODEC
• ST-MEMS digital microphones
• 8-Mbit PSRAM
• 2 user LEDs
• 1 user and 1 reset push-buttons
• 4-direction joystick with selection button
• Board connectors:
– Camera 8 bit
– USB with Micro-AB
– Stereo headset jack including analog
microphone input
– microSD™ card
• Board expansion connectors:
– Arduino™ Uno V3
– STMod+
• Board expansion features:
– Quectel UG96 worldwide cellular modem
penta-band 2G/3G module, 7.2 Mbps
downlink, 5.76 Mbps uplink
– Modem reset red LED and modem
signaling green LED
– Switchable SIM interface, eSIM and
MicroSIM
– Pulse 2G/3G SMA antenna for frequency
ranges: 850 / 900 / 1800 / 1900 / 2100 MHz
• Flexible power-supply options: ST-LINK, USB
VBUS, or external sources
• On-board ST-LINK/V2-1 SWD,TAG
debugger/programmer with USB reenumeration
capability: mass storage, virtual
COM port and debug port
Description
The P-L496G-CELL01 STM32 discovery pack for
2G/3G cellular to cloud (STM32-C2C/2G-3G) is a
turnkey development platform for cellular and
cloud technology based solutions.
The pack is composed of an STM32L496AGI6-
based low-power discovery mother board with
preloaded firmware, and an STMod+ cellular
expansion board with antenna.