DESCRIPTION

The HCC4066B (extended temperature range) and HCF4066B (intermediate temperature range) are monolithic integrated circuits, available in 14-lead dual in-line plastic or ceramic package and plastic micropackage.

■ 15V DIGITAL OR ± 7.5V PEAK-TO-PEAK SWITCHING
■ 80Ω TYPICAL ON RESISTANCE FOR 15V OPERATION
■ SWITCH ON RESISTANCE MATCHED TO WITHIN 5Ω OVER 15V SIGNAL-INPUT RANGE
■ ON RESISTANCE FLAT OVER FULL PEAKTO-PEAK SIGNAL RANGE
■ HIGH ON/OFF OUTPUT-VOLTAGE RATIO : 65dB TYP. @ fis = 10kHz, RL = 10kΩ
■ HIGH DEGREE OF LINEARITY : < 0.5% DISTORTION TYP. @ fis = 1kHz, Vis = 5 Vp-p, VDD – VSS ≥ 10V, RL = 10kΩ
■ EXTREMELY LOW OFF SWITCH LEAKAGE RESULTING IN VERY LOW OFFSET CURRENT AND HIGH EFFECTIVE OFF RESISTANCE ; 10pA TYP. @ VDD – VSS = 10V, TA = 25°C
■ EXTREMELY HIGH CONTROL INPUT IMPEDANCE (control circuit isolated from signal circuit) : 1012 Ω TYP.
■ LOW CROSSTALK BETWEEN SWITCHES : – 50dB TYP. @ fis = 0.9MHz, RL = 1kΩ
■ MATCHED CONTROL-INPUT TO SIGNALOUTPUT CAPACITANCE : REDUCES OUTPUT SIGNAL TRANSIENTS
■ FREQUENCY RESPONSE, SWITCH ON = 40MHz (typ.)
■ QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE
■ 5V, 10V, AND 15V PARAMETRIC RATINGS
■ INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE
■ 100% TESTED FOR QUIESCENT CURRENT
■ MEETS ALL REQUIREMENTS OF JEDECTENTATIVE STANDARD No. 13A, ”STANDARD SPECIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES”