|
[Description]
This provides a simple but accurate method for measurement of running/static clearance between hidden surfaces, such as big
end or mains bearings, pipe flanges, head gasket, high spots, housings, injection moulding tools etc.
[Features]
• Can highlight, clearance, lobing, ovality on shafts.
• Volumetric measurement takes surface roughness into account.
• Calibration card supplied.
• Clearance measurement 0.001in. to 0.02in. (0.025mm to 0.5mm) can be taken.
• Non corrosive and oil soluble.
• Length is 100mm (10cm)
|