All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.)



   Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test.



- Pulse rated medium base porcelain socket.

- 75W/600V thermoplastic compact fluorescent socket.

- One-piece molded silicone gasket with memory retention.

- High power factor CWA ballast. Or 98% P.F.electronic smart ballast with end of life detection for compact fluorescent.

- All stainless steel hardware.

- All Moving and removable parts are sealed with a memory retention silicone gasket.



1 - One piece cast aluminum removable top louvered cover.

2- White translucent sealed diffuser cylinder.

3- Stainless steel recessed tamper proof cap screws.

4- Multiple cast aluminum louver assembly.

5- One piece cast aluminum base assembly.

6- 8” dia. extruded aluminum bollard stand.

7- Aluminum anchoring bollard base plate assembly.