DESCRIPTION
The Teridian 73S8024RN is a single smart card (ICC) interface IC that can be controlled by a dedicated control bus. The 73S8024RN has been designed to provide full electrical compliance with ISO-7816-3, EMV 4.0 (EMV2000) and NDS specifications.
   
FEATURES
• Card Interface:
    ▪ Complies with ISO-7816-3, EMV 4.0 and NDS
    ▪ A LDO voltage regulator provides 3V / 5V to the card
        from an external power supply input
    ▪ Provides at least 90mA to the card
    ▪ ISO-7816-3 Activation / Deactivation sequencer with
        emergency automated deactivation on card removal
        or fault detected by the protection circuitry
    ▪ Protection includes 3 voltage supervisors that detect
        voltage drops on VCC (card), VDD (digital)**, and VPC
        (regulator) power supplies
    ▪ The VDD voltage supervisor threshold value can be
        externally adjusted**
    ▪ Over-current detection 150mA max
    ▪ Card clock stop high or low*
    ▪ 2 card detection inputs, 1 for each possible user
        polarity
    ▪ Auxiliary I/O lines, for C4 / C8 contact signals*
    ▪ Card CLK clock frequency up to 20MHz
• System Controller Interface:
    ▪ 3 Digital inputs control the card activation /
        deactivation, card reset and card voltage
    ▪ 4 Digital inputs control the card clock (division rate
        and card clock stop modes)
    ▪ 1 Digital output, interrupt to the system controller,
        allows the system controller to monitor the card
        presence and faults.
    ▪ Crystal oscillator or host clock, up to 27MHz
• Regulator Power Supply:
    ▪ 4.75V to 5.5V (EMV 4.0)
    ▪ 4.85V to 5.5V (NDS)
• Digital Interfacing: 2.7V to 5.5V
• 6kV ESD Protection on the card interface
• Package: SO28, 20QFN or 32QFN
   
APPLICATIONS
• Set-Top-Box Conditional Access and Pay-per
    View
• Point of Sales and Transaction Terminals
• Control Access and Identification