Product Description
The RF2460 is a receiver front-end designed for the receive section of PCS CDMA and W-CDMA applications. It is designed to amplify and downconvert RF signals while providing 29dB of stepped gain control range and features digital control of LNA gain, mixer gain, and power down mode. A further feature of the chip is adjustable IIP3 of the LNA and mixer using an off-chip current setting resistor. Noise Figure, IP3, and other specs are designed to be compatible with the IS-98B for CDMA PCS communications. The IC is manufactured on a SiGeHBT process and packaged in a 20-pin leadless chip carrier with an exposed die flag.

Features
• Complete Receiver Front-End
• Stepped LNA/Mixer Gain Control
• Adjustable LNA/Mixer Bias Current
• 24dB Gain and 2.2dB Noise Figure at Maximum Cascade Gain

Typical Applications
• CDMA PCS Handsets
• GPS Receiver
• W-CDMA Handsets
• General Purpose Downconverter
• Commercial and Consumer Systems
• Portable Battery-Powered Equipment