Overview
The LC680100A is a 32 bit microcontroller developed exclusively by Sanyo, based on a 32 bit RISC CPU and incorporating on a single chip a high speed multiplier, 2kB of cache RAM, 2kB data RAM, DRAM control unit, external memory control unit and peripheral
It is an ideal control device for digital cameras, color printers and hand held data terminals.

Features
(1) CPU core :32 bit RISC (Speed: 15MHz, Instruction cycle time: 67ns)
(2) High Speed Multiplier :16bit x 16bit (in 1 instruction cycle)
(3) Instruction cache RAM :2kB (512x32bit)
(4) Data RAM :2kB (512x32bit)
(5) DRAM Control Unit
(6) External memory bus control unit
(7) I/O port :One 16 bit I/O port, one 8 bit I/O port
(8) UART :Two full duplex asynchronous channels (one channel has 16bit FIFO)
(9) Serial I/O :One three-wire synchronous clock, 8 bit
(10) Timer :4 channels (TM0 = 16bit + 16bit) (TM1, TM2, TM3 = 8bit + 8bit)
(11) PWM Output :Three 8 bit resolution outputs (Common with TM1, TM2, TM3)
(12) Interrupt controller :13 source events (5 internal, 8 external), 5 vectored
(13) OSC circuit :Two types: main and RC. VCO/PLL is built-in, frequency multiplication possible.
(14) Standby :Standby (HOLD) and sleep (HALT) modes available
(15) VDD :3.3V typ.