Features
• Operating characteristics
    – Voltage range: 1.71 V to 3.6 V
    – Flash write voltage range: 1.71 V to 3.6 V
    – Temperature range (ambient): -40°C to 105°C
• Core
    – Up to 50 MHz V1 ColdFire CPU
    – Dhrystone 2.1 performance: 1.10 DMIPS per MHz when executing from internal RAM, 0.99 DMIPS per MHz when executing from flash memory
• System
    – DMA controller with four programmable channels
    – Integrated ColdFire DEBUG_Rev_B+ interface with single-wire BDM connection
• Power management
    – 10 low power modes to provide power optimization based on application requirements
    – Low-leakage wakeup unit (LLWU)
    – Voltage regulator (VREG)
• Clocks
    – Crystal oscillators (two, each with range options): 1 kHz to 32 kHz (low), 1 MHz to 8 MHz (medium), 8 MHz to 32 MHz (high)
    – Multipurpose clock generator (MCG)
• Memories and memory interfaces
    – Flash memory, FlexNVM, FlexRAM, and RAM
    – Serial programming interface (EzPort)
    – Mini-FlexBus external bus interface
• Security and integrity
    – Hardware CRC module to support fast cyclic redundancy checks
    – Hardware random number generator (RNGB)
    – Hardware cryptographic acceleration unit (CAU)
    – 128-bit unique identification (ID) number per chip
• Analog
    – 16-bit SAR ADC
    – 12-bit DAC
    – Analog comparator (CMP) containing a 6-bit DAC and programmable reference input
    – Voltage reference (VREF)
• Timers
    – Programmable delay block (PDB)
    – Motor control/general purpose/PWM timers (FTM)
    – 16-bit low-power timers (LPTMRs)
    – 16-bit modulo timer (MTIM)
    – Carrier modulator transmitter (CMT)
• Communication interfaces
    – UARTs with Smart Card support and FIFO
    – SPI modules, one with FIFO
    – Inter-Integrated Circuit (I2C) modules
• Human-machine interface
    – Up to 48 EGPIO pins
    – Up to 16 rapid general purpose I/O (RGPIO) pins
    – Low-power hardware touch sensor interface (TSI)
    – Interrupt request pin (IRQ)