Description
The SMF series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for use in applications where board space is at a premium. Each device will protect up to four lines. They are unidirectional devices and may be used on lines where the signal polarities are above ground.
TVS diodes are solid-state devices designed specifically for transient suppression. They feature large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation.
The SMF series devices may be used to meet the immunity requirements of IEC 61000-4-2, level 4. The small SC70 package makes them ideal for use in portable electronics such as cell phones, PDA’s, notebook computers, and digital cameras.

Features
◆ Transient protection for data lines to
   IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
   IEC 61000-4-4 (EFT) 40A (5/50ns)
◆ Small package for use in portable electronics
◆ Protects four I/O lines
◆ Working voltage: 5V and 12V
◆ Low leakage current
◆ Low operating and clamping voltages
◆ Solid-state silicon-avalanche technology

Applications
◆ Cellular Handsets and Accessories
◆ Cordless Phones
◆ Personal Digital Assistants (PDA’s)
◆ Notebooks & Handhelds
◆ Portable Instrumentation
◆ Digital Cameras
◆ Peripherals
◆ MP3 Players