GENERAL DESCRIPTION
The ADV7195 is a triple high-speed, digital-to-analog encoder on a single monolithic chip. It consists of three high-speed video D/A converters with TTL-compatible inputs.

FEATURES
   INPUT FORMATS
      YCrCb in 2 x 10-Bit (4:2:2) or 3 x 10-Bit (4:4:4) Format
         Compliant to SMPTE-293M (525p), ITU-R.BT1358
         (625p), SMPTE274M (1080i), SMPTE296M (720p)
         and Any Other High-Definition Standard Using
         Async Timing Mode
      RGB in 3 x 10 Bit (4:4:4) Format

   OUTPUT FORMATS
      YPrPb Progressive Scan (EIA-770.1, EIA-770.2)
      YPrPb HDTV (EIA-770.3)
      RGB Levels Compliant to RS-170 and RS-343A
      11-Bit + Sync (DAC A)
      11-Bit DACs (DAC B, DAC C)

   PROGRAMMABLE FEATURES
      Internal Test Pattern Generator with Color Control
      Y/C Delay (±)
      Gamma Correction
      Individual DAC On/Off Control
      54 MHz Output (2x Oversampling)
      Sharpness Filter with Programmable Gain/Attenuation
      Programmable Adaptive Filter Control
      Undershoot Limiter
      VBI Open Control
      I2C® Filter
      CGMS-A (525p)
      2-Wire Serial MPU Interface
      Single Supply 3.3 V Operation
      52-MQFP Package

APPLICATIONS
   Progressive Scan/HDTV Display Devices
   MPEG at 81 MHz
   Progressive Scan/HDTV Projection Systems
   Digital Video Systems
   High Resolution Color Graphics
   Image Processing/Instrumentation
   Digital Radio Modulation/Video Signal Reconstruction