POWER OPTO™ Isolator

2 Amp Zero–Cross Triac Output

This device consists of a gallium arsenide infrared emitting diode optically coupled to a zero–cross triac driver circuit and a power triac. It is capable of driving a load of up to 2 amps (rms) directly, on line voltages from 20 to 280 volts ac (rms).

• Provides Normally Open Solid State AC Output with 2 Amp Rating

• 70 Amp Single Cycle Surge Capability

• Zero–Voltage Turn–on and Zero–Current Turn–off

• High Input–Output Isolation of 3750 vac (rms)

• Static dv/dt Rating of 400 Volts/µs Guaranteed

• 2 Amp Pilot Duty Rating Per UL508 117 (Overload Test) and 118 (Endurance Test) [File No. 129224]

• CSA Approved [File No. CA77170–1].

• SEMKO Approved Certificate #9507228

• Exceeds NEMA 2–230 and IEEE472 Noise Immunity Test Requirements (See Fig.14)