D-4000 Series (Wire-to-Board, Wire-to-Panel and Wire-to-Wire)

Product Facts
■ 20A of current is achievable with the use of 3-position connectors
■ Newly designed contacts with four contact points
■ Dynamic 4000 Series achieved a 50% or greater improvement in current values compared with the Dynamic 3000 Series. At the same time, mating height increased only approximately 14%
■ Current capacity per unit volume is also higher by approximately 32%
■ Wire-to-board type (2-, 3- and 4-position) and wire-to-wire type (3-position). This flexible line-up will help meet customer demands. Sequential pins are also available.