Introduction
This catalog covers theAmphenol MIL-C-26482, Series 2 Connectors. These connectors are bayonet coupling type, and they feature crimp contacts that are rear insertable and rear releasable. They can be ordered throughAmphenol, by military or equivalent proprietary part numbers.

The connectors covered in this catalog broaden the miniature cylindrical family offered byAmphenol, so that now users have the broadest range of product available to them.

DESIGN CHARACTERISTICS
   Medium size, environmentally resistant connector
   Recommended operating voltage to 1000 VAC (RMS)
      at sea level
   Quick positive coupling assured by 3 point bayonet coupling
      system
   Visual confirmation of complete coupling
   Eliminates mismating by the use of five key/keyway design
   Insertion and removal of contacts from the rear of the connectors
      assures no damage to the front that might affect the sealing
      characteristics
   Utilizes same standard qualified rear release type
   plastic tool for contact insertion and removal
   Contacts are qualified to MIL-C-39029 requirements - BIN
      coded (three colour bands), and are crimped with standard crimp
      tools per MIL-C-22520
   Grommets are constructed of tear-resistant
      elastomer and experience no degradation when exposed to a
      broad range of fluids
   Sealing over a range of wire diameters is assured by a triple
      webbed grommet at the rear of the connector
   Closed entry socket side of the insert is designed with a lead-in
      chamfer and a hard face that will accept a pin contact bent within
      pre-established limits
   Elastomer interfacial seal on the pin side has raised barriers
      around each pin which displace into the socket chamfer when
      mated, providing a positive moisture seal