EMBEDDED 32-BIT MICROPROCESSOR WITH 16-BIT BURST DATA BUS

The 80960SA is a member of Intel’s i960® 32-bit processor family, which is designed especially for low cost embedded applications. It includes a 512-byte instruction cache and a built-in interrupt controller. The 80960SA has a large register set, multiple parallel execution units and a 16-bit burst bus. Using advanced RISC technology, this high performance processor is capable of execution rates in excess of 7.5 million instructions per second*. The 80960SA is well-suited for a wide range of cost sensitive embedded applications including non-impact printers, network adapters and I/O controllers.

■ High-Performance Embedded Architecture
   — 20 MIPS* Burst Execution at 20 MHz
   — 7.5 MIPS Sustained Execution at 20 MHz
■ 512-Byte On-Chip Instruction Cache
   — Direct Mapped
   — Parallel Load/Decode for Uncached Instructions
■ Multiple Register Sets
   — Sixteen Global 32-Bit Registers
   — Sixteen Local 32-Bit Registers
   — Four Local Register Sets Stored On-Chip
   — Register Scoreboarding
■ Pin Compatible with 80960SB
■ Built-in Interrupt Controller
   — 4 Direct Interrupt Pins
   — 31 Priority Levels, 256 Vectors
■ Easy to Use, High Bandwidth 16-Bit Bus
   — 32 Mbytes/s Burst
   — Up to 16 Bytes Transferred per Burst
■ 32-Bit Address Space, 4 Gigabytes
■ 80-Lead Quad Flat Pack (EIAJ QFP)
   — 84-Lead Plastic Leaded Chip Carrier (PLCC)
■ Software Compatible with 80960KA/KB/CA/CF Processors