3V Dual 10-Bit, 20/40/60MSPS A/D Converter with Internal Voltage Reference

The ISL5740 is a monolithic, dual 10-bit analog-to-digital converter fabricated in an advanced CMOS process. It is designed for high speed applications where integration, bandwidth and accuracy are essential. The ISL5740 features a 9-stage pipeline architecture. The fully pipelined architecture and an innovative input stage enable the ISL5740 to accept a variety of input configurations, singleended or fully differential. Only one external clock is necessary to drive both converters and an internal band-gap voltage reference is provided. This allows the system designer to realize an increased level of system integration resulting in decreased cost and power dissipation.

Features
• Sampling Rate . . . . . . . . . . . . . . . . . . . . . .20/40/60MSPS
• 9.1 Bits at fIN = 10MHz
• Low Power at 60MSPS. . . . . . . . . . . . . . . . . . . . . .280mW
• Power Down Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 6mW
• Wide Full Power Input Bandwidth. . . . . . . . . . . . . 400MHz
• SFDR at fIN = 10MHz. . . . . . . . . . . . . . . . . . . . . . . . .70dB
• Excellent Channel-to-Channel Isolation . . . . . . . . . . .75dB
• On-Chip Sample and Hold Amplifiers
• Internal Bandgap Voltage Reference . . . . . . . . . . . . 1.25V
• Single Supply Voltage Operation . . . . . . . . . .+2.7V - 3.6V
• TTL/CMOS(3V) Digital Inputs CMOS Digital Outputs
• Offset Binary or Two’s Complement Digital Data Output Format
• Dual 10-Bit A/D Converters on a Monolithic Chip
• Pin Compatible Upgrade to AD9288