General Description
The MAX4410 stereo headphone driver is designed for portable equipment where board space is at a premium. The MAX4410 uses a unique, patented, DirectDrive architecture to produce a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, board space, and component height.

Features
♦ No Bulky DC-Blocking Capacitors Required
♦ Ground-Referenced Outputs Eliminate DC-Bias Voltages on Headphone Ground Pin
♦ No Degradation of Low-Frequency Response Due to Output Capacitors
♦ 80mW Per Channel into 16Ω
♦ Low 0.003% THD + N
♦ High PSRR (90dB at 1kHz)
♦ Integrated Click-and-Pop Suppression
♦ 1.8V to 3.6V Single-Supply Operation
♦ Low Quiescent Current
♦ Independent Left/Right, Low-Power Shutdown Controls
♦ Short-Circuit and Thermal Overload Protection
♦ ±8kV ESD-Protected Amplifier Outputs
♦ Available in Space-Saving Packages
    16-Bump UCSP (2mm x 2mm x 0.6mm)
    14-Pin TSSOP

Applications
    Notebooks
    Cellular Phones
    PDAs
    MP3 Players
    Web Pads
    Portable Audio Equipment