General Description
The Micrel MPD8020 is a Smart Power Application Specific Integrated Circuit (ASIC). The MPD8020 features an array of low-voltage CMOS analog and digital circuits and high voltage DMOS power transistors on a monolithic integrated circuit. The MPD8020 provides the customer a proprietary design with size, reliability, performance advantages.

Features
• Sixteen 100V, 200mA, 10Ω, N-channel, DMOS power FETs with fully floating gates, drains, and sources
• DMOS can be paralleled for 100V, 3.2A, 0.625Ω, single, half-bridge, full-bridge, or bilateral switches
• 200 uncommitted CMOS gates array
• Twelve TTL/CMOS I/O buffers
• Three op amp/comparator/Schmitt trigger circuits
• One unity-gain analog buffer
• 1.25V/2.5V bandgap reference
• Overtemperature sensor
• Charge pump (drives high-side switch gates above VDD)
• Sixteen medium-current, current-sink drivers
• Sixteen high-voltage, level-shifting, high-side drivers
• Separate analog- and digital-ground pads
• Numerous logic, high-voltage, VCC, and VDD pads
• Resistors, capacitors, and a zener diode
• Military temperature specifications available
• Military, commercial, and power packages

Applications
• Switch-mode regulators
• Motor control
• Bilateral analog switch
• High-voltage switch
• Relay and solenoid driver
• Smart switch with bus decoder
• Half- or full-bridge driver
• 3-phase driver
• Lamp driver
• Differential line driver
• Automotive switch
• Printer solenoid driver
• High-voltage display driver