General Description

ATS266 is an integrated Hall sensor with output drivers designed for electronic commutation of brush-less DC motor applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and

complementary darlington open-collector drivers for sinking large current loads. An internal bandgap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range.

Features

- On-chip Hall plate

- Operating voltage: 4V~28V

- Output current: 400mA(Continuous)

- Reverse protection diode only for chip reverse power connecting^(Note)

- Output protection Zener breakdown Vz=56V(Typ) 

- Package: SIP-4L

(Note)

Protection diode only exists at power pin(1,4) output, not including pin (2,3).

Application

- Dual-coil Brush-less DC Motor

- Dual-coil Brush-less DC Fan

- Revolution Counting

- Speed Measurement