General Description
The DS1375 digital real-time clock (RTC) is a low-power clock/calendar that does not require a crystal. The device operates from a digital clock input pin at one of four frequencies: 32.768kHz, 8.192kHz, 60Hz, or 50Hz. It maintains seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with an AM/PM indicator. Two programmable time-of-day/date alarms, a programmable square-wave output, and 16 bytes of SRAM are provided. Address and data are transferred serially through a 2-wire bidirectional bus.

Features
♦ RTC Counts Seconds, Minutes, Hours, Day, Date, Month, and Year with Leap-Year Compensation Valid Up to 2100
♦ Two Programmable Alarms
♦ Programmable Square-Wave Output
♦ Operates from a 32.768kHz, 8.192kHz, 60Hz, or 50Hz Digital Clock Signal
♦ 16 Bytes of SRAM
♦ Fast (400kHz) 2-Wire Interface
♦ 1.7V to 5.5V Operation

Applications
    RTC Complement to the DS32kHz TCXO
    Utility Meters
    Appliances
    Consumer Electronics
    Automotive