SWITCHMODE Power Rectifier D2PAK Surface Mount Power Package

The D2PAK Power Rectifier employs the Schottky Barrier principle in a large metal−to−silicon power diode. State−of−the−art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for use in low voltage, high frequency switching power supplies, free wheeling diodes, and polarity protection diodes. These state−of−the−art devices have the following features:

Features
• Center−Tap Configuration
• Guardring for Stress Protection
• Low Forward Voltage
• 125C Operating Junction Temperature
• Epoxy Meets UL 94, V−0 @ 0.125 in
• Short Heatsink Tab Manufactured − Not Sheared
• Similar in Size to the Industry Standard TO−220 Package
• AEC−Q101 Qualified and PPAP Capable
• NRVBB Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements
• All Packages are Pb−Free*