GENERAL DESCRIPTION
The ADG1408 and ADG1409 are monolithic CMOS analog multiplexers comprising eight single channels and four differential channels, respectively. The ADG1408 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1, and A2. The ADG1409 switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF.
   
FEATURES
    5Ω Max On Resistance
    0.5Ω Max On Resistance Flatness
    33 V Supply Maximum Ratings
    Fully specified at ±15V/12V/±5V
    3V Logic Compatible Inputs
    Rail-to-Rail Operation
    Break-Before-Make Switching Action
    16-Lead TSSOP Packages
    Typical Power Consumption (< 0.03 µW)
   
APPLICATIONS
    Relay Replacement
    Audio and Video Routing
    Automatic Test Equipment
    Data Acquisition Systems
    Battery-Powered Systems
    Sample-and-Hold Systems
    Communication Systems